Theme: Reuse of Structural Concrete Elements
Cement 2026/6 focuses entirely on the reuse of structural concrete elements in the building sector. This extended issue includes articles on the importance of reuse, practical approaches, implications for structural design and detailing, research, regulations, and a range of real-world projects.
The Most Sustainable Load-Bearing Structure Is Already There
Exploring MVRDV's design philosophy
For MVRDV, reducing CO2 emissions in construction does not start with a more sustainable concrete mix or a bio-based alternative. The first question is more fundamental: is it necessary to build something new at all? And if new construction is unavoidable, how much of what already exists can be retained, adapted, or reused?
This approach has far-reaching implications for structural reuse. The editors of Cement explore the design philosophy of the Rotterdam-based architectural practice.
Read the full article in Dutch
Reuse It!
Circular design is about orchestrating elements and building trust
Author:
Pim Peters MSc RO, IMd Consulting Engineers
One of the most effective ways to achieve sustainable construction is through reuse. Whether this involves reusing an entire load-bearing structure or individual structural components, it demands considerable creativity from structural designers.
In practice, the decision to reuse is often still based primarily on a cost-benefit assessment. However, there are other compelling reasons for reuse. It preserves part of our built heritage and helps conserve scarce primary raw materials. These benefits are often overlooked or given insufficient weight in decision-making. This needs to change.
Read the full article in Dutch
From Demolition to Harvesting
Reusing structural elements requires more than careful dismantling
Authors:
Arend van de Beek, Lagemaat
Jacques Linssen, Cement / Aeneas Media
Structural elements are increasingly being given a second life. For demolition contractors, this represents a fundamental shift: instead of demolishing structures, they must carefully harvest reusable components.
This requires technical expertise and also early planning, effective quality assurance, well-organised logistics, and a viable business case. Intrinsic motivation is important, as reuse is not yet the financially obvious choice in every project.
Read the full article in Dutch
Quantifying the Environmental Benefits of Concrete Reuse
Comparison with high-grade recycling and current practice
Authors:
Iris Snijders Blok MSc and Benthe Vermaas MSc, LBP|SIGHT
Reusing structural concrete elements is often regarded as a logical step towards circular construction. But how significant are the environmental benefits in practice?
This article compares three scenarios for concrete floors: reuse, high-grade recycling, and the current practice of demolition followed by new construction. It identifies the factors that determine the environmental outcome. The best solution is not necessarily the same in every situation and may vary from project to project.
Read the full article in Dutch
Designing Within the ReCreate Project
Overview of dismantling and reuse projects
Authors:
Prof. Simon Wijte MSc, Eindhoven University of Technology / Hageman Consulting Engineers
Marcel Vullings MSc, TNO
The international ReCreate project investigates the reuse of precast concrete elements that were not originally designed for disassembly. The research combines scientific studies with practical pilot projects focusing on dismantling and reuse.
Read the full article in Dutch
Protocol for the Reuse of Structural Concrete
Quality assurance through a new protocol supporting the transition to reuse in precast concrete structures
Authors:
Jilke Donkervoort MSc, IMd Consulting Engineers
Agnese Scalbi PhD, Eindhoven University of Technology
The use of donor elements can make a significant contribution to the construction of sustainable buildings. In this approach, structural concrete elements are used for a second time.
Before a donor element can be incorporated into a new structure, various investigations are required to establish its structural quality. A protocol for these investigations has been developed within ReCreate, an international research project focusing on the reuse of precast concrete structures.
Read the full article in Dutch
Dismantling and Reconnecting
Re-establishing and replacing connections in reused precast concrete structures within ReCreate pilot projects
Authors:
Thijs Lambrechts MSc, Eindhoven University of Technology
Prof. Simon Wijte MSc, Eindhoven University of Technology / Hageman Consulting Engineers
Marcel Vullings MSc, TNO
In the various pilot projects within ReCreate, an international research project on the reuse of precast concrete elements, different types of elements have been reused under a range of conditions.
Different techniques are required to dismantle and reconnect these elements. The existing connection is the most important factor in determining the appropriate dismantling method. When establishing new connections, the decisive factors are the connection characteristics of the existing element and the required force transfer in its new application.
Read the full article in Dutch
From Monolithic to Modular
Reconnecting sawn in-situ concrete elements
Author:
Femke Middeldorp MSc, Witteveen+Bos
The Dutch construction industry faces a major challenge: meeting substantial construction and renovation demands while achieving full climate neutrality by 2050. This makes the transition towards circular construction essential.
While the reuse of steel and precast concrete is becoming increasingly common, in-situ concrete is lagging behind, mainly because of its monolithic connections.
Graduation research at Delft University of Technology demonstrates that the direct reuse of in-situ concrete walls, beams, floors, and columns is both structurally and practically feasible, provided that the transition from monolithic to modular elements is supported by carefully designed connection details.
Read the full article in Dutch
A First with Reused Precast Concrete Elements
Circular Centre Netherlands constructed using concrete elements from the Prinsenhof building
Authors:
Sebastiaan van Hellenberg Hubar MSc and Pim Peters MSc, IMd Consulting Engineers
Construction is underway in Heerde on Circular Centre Netherlands (CCN), a hub for knowledge sharing, innovation, research, and collaboration in circular building materials and the circular construction economy.
The project is not only a showcase for the reuse of structural components, building elements, and building services installations, but also a world first in the high-value reuse of precast load-bearing concrete elements.
Read the full article in Dutch
Cutting Concrete Elements from an In-Situ Structure
Circular demolition project at Stationsplein 107 demonstrates the potential for reusing concrete structures
Author:
Maartje Dijk MSc, Witteveen+Bos
During the demolition of Stationsplein 107 in Leiden, the in-situ concrete frame, with a volume of approximately 4,200 m³, accounted for by far the largest proportion of the materials released.
To meet the municipality's ambitions for circular demolition, high expectations were set for the future use of this material. By cutting structural elements from the floor slabs, the project demonstrated that even an in-situ concrete structure can be reused in a high-value application.
Read the full article in Dutch
From Reusing an Entire Apartment to Recycled Concrete Aggregate
Lessons from SUPERLOCAL on the structural reuse of concrete
Author:
Tom Feijen BEng, Ingenieursbureau A. Palte
Cutting an entire apartment out of an existing concrete residential building, lifting it out, and reusing it as a home: this was actually achieved in the SUPERLOCAL project in Kerkrade.
Within the same project, concrete was also reused at different scales: as an existing structural frame, as individual structural elements, as large concrete blocks, and as aggregate for new concrete.
The project became an exploration of the boundaries between what is technically possible, demonstrably safe, and practically feasible.
Read the full article in Dutch
Concrete Reuse Calls for Additional Regulations
Testing can reduce uncertainty about the properties of existing concrete elements incorporated into new structures
Authors:
Prof. Simon Wijte MSc, Eindhoven University of Technology / Hageman Consulting Engineers
Ben Matthews PhD, Eindhoven University of Technology
Marcel Vullings MSc, TNO
Structural engineers routinely use standards for designing new buildings and assessing existing structures. But which design rules should apply when existing structural elements are incorporated into new structures?
Drawing partly on experience gained within the ReCreate project, this article presents a proposal for addressing this question.
Reacties